Ok, so the display is busted. What a bummer! Anyway thanks for your help! But it can't be because of the EEPROM module. I have had these problems with the display since 2005 and have never actually used it because of its unreliability. (Check this thread http://www.lcdforums.com/forums/viewtopic.php ...

Hi again!
Yes, i shorted pins six and seven, i know i'm not supposed to count the first and last pin. And yes, it was a typo.
Anyway this has not made the display work differently and it still only outputs jibberish. So please let me know of your other ideas on what could be wrong!

Thanks!

/Peter

Hi again!
My model nuber is 3376-05M01. I hope that it tells you something. by dismounting my computer i also found out that the display was revision 1.4. Hope that helps to some point...

Again, thanks for helping out!

/Peter

Thanks for the quick reply!
Unfortunately i'm on linux right now so i can't use windows software. I tried running uProject through a windows emulator (wine) but it didn't work. If anyone is interested mogd.exe works just fine.
Anyway i issued the commands via the commandline as such:

echo -e "\xFE ...

I'm not sure how to describe my trouble with the display. At first it was working ok then suddenly all it did was to display "garbage" on the screen. The only way i could "restore" the display to working order was to run LCDC and then wipe the entire memory of the lcd and then upload new fonts into ...

Thanks for helping out it is truly invaluable!
I have just wiped the module memory system with mogd and that completley messed up the display. I still have some functionality, i can turn off the backlight but can't turn it on again. If i try to activate a gpo with uproject it takes me at least 5 ...

Thanks for the quick reply.

Did you develope your own application or are you using software?

I am currently using lcdsmartie (http://lcdsmartie.sourceforge.net). But i can't display text with the software that came with the display either. That is, i have tried Uproject and mogd without success ...

Hi again!
I'm having more trouble with my display. From time to time the display stops showing text. Gpos, buttons, contrast, backlight and displaying bitmaps still works great.
I have no idea on how to get the display up and running again. Usually i do a complete clean up of the displays memory and ...

Found the software on the cd that came with the display and it worked great! Thanks for the help!

/Peter

You've got mail

/Peter

Thanks for the great support!
Sorry if this is a stupid question but can i do this by hyperterm? If so could you give me an hint on how to do it? Is it just to write "254 85 [1]" to set debounce time to 6554 microseconds.

This is what the manual said:

6.5.7 Set debounce time (254 85 [time])
[time ...

I am putting together a home made keypad with my GLK12232-25-SM. On that keyboard i have attached a scroll wheel. My problem is that the display hardly registers any of the "pressed button events" generated by the scroll wheel. Is there a way to increase the displays keyboard sensitivity so that i ...

Thanks for replying.
Yes everything works except turning the backlight on and off. The only solution i have found that solves this problem is to turn the computer off for ten minutes or so. When i power up the computer again the backlight is working again.

While i have your attention i would like ...

I have now attached the GLK1232-25-SM to my computer and it works great!
I have trouble with the backlight though. Sometimes the backlight turns off when i restart the computer and i can't start it manually again. I have tried starting it with both lcdc and mogd but nothing works.

Anyone have a ...

Thanks!

You saved my day!

/Peter