My customer has 13 that work properly and 15 that have problems. We'll see what happens when the memory update is applied.

The one I've been using for trouble shooting was a brand new one.

Thanks Troy. This appears to have worked. I'll pass it along to my customer and let you know how it goes.

This is not exactly defaults. The MO logo no longer shows at power on. Not really that important at this point. The system now boots to the operating system with a clear screen, no gibberish. When I go into UProject to send text to the screen it still doesn't show up in the right place. If I send th...

The LCD seems to work as expected with the jumper on.

Clear works. The text that I send to it is in the expected place. Bar graph demos work.
What next?

Here's some ramblings: uProject- Display Tuner R.v0.7 - untitled.usf Baud rate on Com Setup tab = 19200 Baud rate on Main tab = 19200 Clear Display button does nothing. Load Startup Screen clears the display. Set Cursor Position (row 1, column 1) causes random gibberish. Show Large Digit-clock cause...

The machines are supposed to be identical. The customer says that some of them act correctly and some of them
act like the second line in the graphic below. The gibberish always the same.

Any ideas on what I should check?

Can y'all tell me if there is a firmware difference between 09M05-0218 and 09M05-0282 ?

I have a LCD0821, serial connected, to a Supermicro X8DTH MB. When I turn the system on the LCD displays the MO logo. Thats good.
As the boot process continues, random gibberish appears on the LCD. Is there any way to prevent the gibberish from appearing?

Any idea where I can get one of these?