yes LCDC let me choose that but that AFTER the pc has booted and LCDC was loaded ....

I need to know how to set GPO's during boot time, before LCDC is loaded

Hey guys

My lcd is working great together with my control bay under the floppy, GPO connected to leds etc ...

http://users.skynet.be/pirre/case.html

I'm wondering how I can change the initial status of my display and GPO's during boot ...

now some GPO's are on some are off
and the display says ...

http://users.skynet.be/pirre/case.html

the dot at the end was too much

It's finished

take a look at the result:

http://users.skynet.be/pirre/case.html.

on the right side a switch to control the cpu fan rpm, on the left a knob to control rpm of 3 case fans, green leds (one for mobo one for cpu temp) light when temps increase, and flash when temp is getting too high ...

ah so don't use the resistor then
just plug in and play
roger that
thx mate

hope it works and lcd survives

ok i'll use the resistor for 5V delivered with the led, service is good
got instant mail reply, package on the way
the even lowered shipping cost because the package was less than 500g
nice people imho

I do worry when use the resistor deliverd with the led for 5V use, about this passage from the ...

Hey guys

I just bought some leds from http://www.computuning.com , to be precise I bought some of these : http://www.computuning.com/cgi-bin/read.cgi?board=ctligacc&y_number=2&nnew=2

I know the GPO can deliver 5 volts, at a max of 20 mA ... but what's the thing with the limiting resistor ...