Hi Henry,
I used the code.Used library and configuration also and integrated it.the ValH is 0 and ValL 255. I changed the delay time several times

Hi Daniel, No I amnot written it. Also backlight isnot coming. is this the problem? i have given 3.3 v external supply to all supply pins of display. And GND is common for supply source and mcu card. Int is grounded through 4.7 kohm resistor. If you can see I defined the CLKEXT and frequency 36M. Pl...

Hi there,
I am using eve2-70-TPR. I am getting reg-Id 7c but cpu reset I am getting 224. and display isnot coming on

I am able to read 7c from reg id. But backlight isnot coming. Also i am reading reset register it is giving output 12.

HI, As I am using Matrix orbital EVE2-70A TPR module I did the following wiring 1) pin no.1 3.3v, pin no.16 3.3v, pin no.17,18 all are shorted to 3.3 v from mcu board. 2) Pin no.2 GND, Pin no. 15 GND, Pin no. 19,20 all are shorted to GND from mcu board 3) int pin is shorted to GND of mcu board throu...

Hi there,
I have ported my infineon codes. spi writes the data. but cannot read from lcd. Also power light is red. After Host command i tried to read the REG_ID but the value always comes 0x00. Also I am not using interrupt.

ERROR: CPU is not halted ERROR: Can not read register 15 (R15) while CPU is running Reading all registers ERROR: Can not read register 0 (R0) while CPU is running ERROR: Can not read register 1 (R1) while CPU is running ERROR: Can not read register 2 (R2) while CPU is running ERROR: Can not read reg...

I get error in debugger cannot read register.

Hi,
thank you for given link. I did the program as per manual and eve knob. but display isnot going on. please help.

Hi there,
I am using matrix orbital EVE2-70A with resistive touch screen display for my industrial projects. I am using infineon xmc4500 relax kit. Please send me the project code which has used this display. I will convert it in my project. Thank you.