Are you having any other troubles communicating via the I2C protocol?

Jereon,

Can you please contact me at myero@matrixorbital.ca to discuss a few RMA options. I apologize for the inconvenience...we'll get you up and running ASAP!!

Hi Jeroen,

Thanks for posting on the forum! Can you tell me where you purchased the module from and the color of the power cable you received?

What set of commands are you sending when you poll the keypad??

Glad to hear that everything is working fine!! If you have any further questions or concerns, feel free to post.

Adam,

Keep me posted...If you would like, I can send you an example code of us bit bashing with a PIC16F877A to the display. What this code does is run a loop of I2C addresses and displays the address on the module in decimal. You can reach me at myero@matrixorbital.ca

Hi Adam,

Can you set up a program that will loop through every possible address and let me know if communication is established with the display.

Hi, Thanks for the post! Yes, we at Matrix Orbital will comply with the RoHS directive and convert to a lead-free product within the required time allowed. We take this directive very seriously and look forward to offering our clients with the best quality available!! If you have any further questio...

James, If your against an overlay with a keypad, then the only MX2 series you can get is as follows: MX22# (silver aluminum overlay) and the MX23# (black aluminum overlay). Please see the following link for MX2 product reference: http://www.matrixorbital.com/index.php?cName=lcd-mx2-series All MX2 mo...

Sorry about the inconvenience, we are currently working towards updating and improving our downloads section.

Hi yeezmon,

Thanks for the question. For a "getting started" guide, please see the following link: http://www.lcdforums.com/forums/viewtopic.php?t=937

If you have any further questions, feel free to post!

Can you tell me what the orientation of the pins are according to color??

Hello...

What type of cable are you using to connect to the com port from the module??

Hi Kevin,

I apologize for the inconvenience, we are currently working on it!! In the meantime, can you email me at myero@matrixorbital.ca and I'll forward you the appropriate drivers!

Hello,

Thanks for the post. Does the module power up when an unmodified floppy power cable is attached to the appropriate header?