If there was something like that available from MO, I'd definately buy one! I'm even thinking of making one myself, I've got a couple T-Fittings I can play with. Just not sure what to seal it with while trying not to impede on waterflow. I'm wondering, are the Dallas One Wire probes waterproof? Or ...

When I use the Screen Builder and then go into the events section. The three LEDs 1-3 are preconfigured to work with email, mm5 temp and fan speed. If I click on LED2 or LED3 the ones configured with MBM5 I receive and error and LCDC exits. The error is: The program raised on a non-continuable exce...

I have looked at my email history and have not received an email from you. I ensure you that if I was emailed you would of received what you required rather quickly!!! Please see your email as I will send you the appropriate information immediately. Miles im still waiting on those files for resetti...

http://www.lcdc.cc/help/configuration.htm#emailconfig check this out. After you have email set up there are two events you need to set up in LCDC to trigger your GPOs to on/off. Just set up a new event to switch on the respective GPO and use the mail plugin the event should be triggered by the mail ...

well... I've badly scratched the front alu plates on both my mx222 :-? I was wondering how easy it would be to replace them? i have lots of spare Lian li bezels lying around and was wondering how easy it would be to remove the original plate cut the lian li bezel and replace them. Is it glued on or ...

email sent....


thanks

One of my MX222 rev 1.4 displays isn't displaying the first two characters on each line. The first two boxes on each line are blank but the information is displaying. It starts at block 3 and trims the information so the last two blocks so they are out of screen. Can anyone help me? Can i hard reset...

Unit: MX222 twice! :D Case: Lian-Li PC 60 USB Difficulty: medium Other: I added LEDs to a 3.5" bay to indicate data transfer Tx/Rx and temp of CPU using three coloured Leds (red for green and blue) I made probes myself rather than pre-made as i wanted to be able to slip the probe between the z...

definitely the first, if you make two ill buy one!

The MX4 looks loverly, it would look even more loverly in aluminium with buttons!

The external cable comes as standard with the unit but you really want an internal cable as the external has to poke out the pci slot into a USB slot. The internal cable connects to a header on your MoBo. Each header supports 2 USB devices so you'll still have space for another USB connection, the M...

your up early if you live in the states 6am by my calculations!

you'll need a solder gun and some heat shrink, try www.newark.com (in the US) for the mate part for the MX2 series one wire headers the part number is in the manual, i cant remember it off the top of my head.

http://www.plasticrandom.net

all the plugins you could want to your hearts desire!

check out http://www.lcdc.cc as well!

http://www.lcdforums.com/forums/viewtopic.php?t=1824 I made my own because of that exact reason. You can use kynar near the end of the probe which is thin enough to get under the cpu and zif socket. I could make some and send them to ya if you want i have loads of mate connectors left. Ill take some...