Just being a pain in the ass again! <:) but.. A little extract from the Guides section! It is recommended you go to your local computer store and liberate some unused WOL cables (I have never seen one used). I went to my local Computer store (Maplin in the UK) asked for some WOL cable and the dumbas...

Miles wrote:If you have a specific question regarding a device, just ask!!

very helpful!

yes which devices can i usefully connect!? got the temp probes and dont need a digital pot, anything else anyone got connected?

6 spare headers seems like such a waste!

Hi, thanks Miles!

Being a total noob here i guess that means nothing useful?


Ah well... ill have to make some more temp probes and stick them to anything i can find!

Are there any other functions or uses for the dallas one wire connectors other than temp probes or digital pots? i have a few spare mate connectors and was wondering if i could utilize them?

Recently received my MX2 and would like to power from the floppy connector. I think that I have identified links 1 and 2 - they are little things with what looks like 000 on them? Looks like 000 with my magnifying glass - are they 0 value resistors? Very nervous about taking a soldering iron to the...

yes, im on bit-tech quite a lot, but the particular tutorials aren't available. But thanks ill keep my eyes open there

sounds like an RMA!

[quote="FallOutBoyTonto"]P.S. Damn, your avatar is scaring me Johnny

I've connected 3 CCFLs to the 3 hi-power GPOs on my MX222. The first two CCFLs work the last one doesn't. (I'm using 'hotkeys' to switch them off and on). I've switched the CCFLs around and its not CCFLs, the one previously not working, works on the other GPOs. So I pinched my Dads multimeter tested...

Thanks miles i read that article. whoa! anyone fancy making me one?? :wink: Im afraid im not that electronically minded as you can guess from my posts! :P I might see if i can attempt it! nice tutorial though. Whats the worst that can happen? i suppose i could always buy a new MO display after i blo...

opps soz read it too quickly

It sounds as though there isnt enough voltage getting to the lcd via the floppy connector? have you any 12v to floppy connector converters that you could hook up to a standard 12v molex connection from your PSU to the lcd via the converter? this will test if the LCD is getting enough juice through a...

Great,

i understand, really glad to see your taking a proactive approach. Anyway i appreciate your situation and i will promise to be alittle more patient in future

The MX 2 rev 1.4 has the jumper just below the fan headers or gpos 1,2,3. By default it is set to high power from the factory. I'm not sure if you need to desolder the jumper 2 as in the online manual, or if this is only to allow fans to boot up instantly at power on. It does required a steady hand ...

thanks miles!

so three inverters on the high powered gpos

how easily can the low powered gpos be modified to handle 12v 0.6A? Can you point me in the direction of a tutorial?