Page 1 of 1

X-Board w/ I2C

Posted: Thu Mar 29, 2007 2:06 pm
by marcopolo5
The X-Board manual states it can communicate via I2C, however, there are only descriptions on how to set serial and TTL modes. How do you set I2C as the protocol?

Thanks!

Posted: Thu Mar 29, 2007 4:15 pm
by Raquel
Hello macopolo5,

Sorry for the inconvenience, but the manual is erroneous. The X-Board S series (which is published on our site) can only do (receive only) RS232 and TTL modes.

Best Regards,