Questions about the GLK12232-25-SM

Michael Zoran · Post by **Michael Zoran** » Mon Mar 07, 2005 5:44 am

I have a few questions about the GLK12232-25-SM that don't seems to be answered in the manual. I'm planning to use the unit with a PIC chip.

1. Are inline graphics possible? The manual seems to say that it's possible to display a bitmap without uploading it to the memory. But the manual doesn't give a command for doing it, only for displaying graphics that have already been uploaded.

2. How much memory does the unit have for uploading graphics?

3. Is a mouting kit available for this unit?

Tom · Post by **Tom** » Mon Mar 07, 2005 2:16 pm

Hi Michael,

Thanks for posting at the forums.

Here are the answers to your questions.

1. Unfortunately you currently cannot upload full bitmaps without uploading the graphics to memory. It can be done, however, it can be only currently done by sending the individual pixels. I apologize for any misunderstanding, and we will work on getting that feature up and running.

2. The unit has 9 memory locations for uploading graphics. The unit uses a memory chip which is 16Kbyte of memory, so you shouldn't exceed that amount.

3. Unfortunately we do not having any mounting kits available for our graphics units. The mounting kits available are found at http://www.matrixorbital.com/index.php?cPath=12_16 .

If you have anymore questions or concerns, please feel free to post.

Best Regards,