I emailed hvw tech support but it's taking them days for a simple answer, so maybe u folks have the answer... TIA.
#1
I have 3 LED wired to the GPOs through 680 ohms resistors. X-Board thinks I want to do configuration when it's powered up. Need (A) hardwire the configuration (board seems to have places to do so), or (B) a software method to reconfig the board AFTER power up.
#2
What the max current drive of backlight pins? Not a deal breaker but would like to keep the guesses to a minimum.
X-board question.
Moderator: Mods
Hello bobb,
Thank you for posting on the forum. Can you please email me at rmalinis@matrixorbital.ca.
Thank you for posting on the forum. Can you please email me at rmalinis@matrixorbital.ca.
Raquel Malinis
Design and Development
Matrix Orbital
Design and Development
Matrix Orbital
Hi Bobb,
We thought we were being smart in the way we designed the configuration jumpers on the X-Board, but somehow missed this scenario. We are updating the X-Board right now and will have a new version in a week or so. We will ship you out a new one ASAP with a new configuration system that will not be affected by LED's.
We thought we were being smart in the way we designed the configuration jumpers on the X-Board, but somehow missed this scenario. We are updating the X-Board right now and will have a new version in a week or so. We will ship you out a new one ASAP with a new configuration system that will not be affected by LED's.
Henry J.
President
Matrix Orbital
President
Matrix Orbital