Installing the USB driver...

Silver Sniper · Post by **Silver Sniper** » Wed May 17, 2006 4:01 am

Why isn't this information included in the instruction manual?

Tom · Post by **Tom** » Wed May 17, 2006 11:29 am

Unfortunately, the manual is quite old, and it will need to be updated. We are producing new documentation, so this manual will also be eventually updated. I apologize for any inconvenience this may have caused you. We also provide information on installing the unit in a ecd that comes with your display.

Best Regards,

Clare · Post by **Clare** » Thu May 18, 2006 8:31 am

Here is an update for everyone.

We will no longer be including the ecd that normally came with some of our displays. Ahhhhh, but not to worry. We have something better!

We provide all our manuals and software downloads online at our Tech Support site at http://www.matrixorbital.ca and questions may be posted on our forum site at http://www.lcdforums.com/forums

The reason: we continually update our manuals and information on the website, but do not with the ecd's. Therefore, you are able to continually download all the lastest information and not be stuck with the out of date ecd. As you all know, we are always coming up with improvements and want you to be able to benefit from this information.

Happy Downloading!

Thanks,
Clare[/b]

jpdana300 · Post by **jpdana300** » Thu Sep 07, 2006 12:00 am

I'm having problems with my display unit. The unit has been working fine for a while now, but after I reinstalled xp I could never get it to work again. I tried installing the driver from the disk, then from the MO website. Neither one has worked. Currently the port and usb controller are showing MO USB Broadcast Driver (com3). When I turn on lcdc and search for the com port, it says Device Unknown Com3. I disconnected the power & usb. Restarted ...reconnect...still doesn't work. By the way, I was in Calgary back in July, just after Stampede. I didn't realize that M/O is from there. Everyone there thought 85-90deg F was hot, but I was loving the wonderful weather compared to Texas heat. Beautifull with the hills everywhere. Plan on going back in '08 and maybe take the wife to Banff.

jros3e · Post by **jros3e** » Wed Sep 05, 2007 9:45 am

Dear Clare.
I have just bought a LK202-24-USB unit but i can not find Vista x32
drivers.
Please advice.

Clare · Post by **Clare** » Wed Sep 05, 2007 9:58 am

Hi jros3e,

The vista driver is on our website
http://www.matrixorbital.ca/drivers/

You would want the one under this heading:

USB Drivers for LK/VK/PK202-24-USB, LK/VK/PK204-24-USB and MX2, MX3, MX4, MX5 and MX6 displays.

Please let me know if you require further assistance.

Thank you,
Clare

jros3e · Post by **jros3e** » Wed Sep 05, 2007 10:18 am

Thanks for your reply dear Clare.
I am trying install the drivers but i have this error message:

Error, ftdiun2k.ini not found

Please advice.

Post by **Ray** » Wed Sep 05, 2007 10:38 am

That file is included in the zipfile on our site, make sure you unpacked all files from the zip file to a single folder and install from there.

jros3e · Post by **jros3e** » Wed Sep 05, 2007 10:56 am

I can not understand what happen.I install the drivers but the when i connect
the usb the windows can not find the drivers and can not install the unit!

Post by **Ray** » Wed Sep 05, 2007 11:27 am

How are you installing the driver?

jros3e · Post by **jros3e** » Wed Sep 05, 2007 7:44 pm

I unpacked all files from the zip and double klick FTDIUNIN. The windows
install the driver but after i connect the unit the windows can not find them!

Post by **Ray** » Thu Sep 06, 2007 7:58 am

FTDIUNIN is the Driver UN Install application, what you should do is unpack the drivers to a folder, plug in the device then point windows to the folder you unpacked the driver in. All should be fine after that.

jros3e · Post by **jros3e** » Thu Sep 06, 2007 11:41 am

Thanks for the advice.I try this way and i will let you know.

jros3e · Post by **jros3e** » Thu Sep 06, 2007 12:35 pm

It works! Thank you very much for advice dear Ray.

Peter_Shaw · Post by **Peter_Shaw** » Tue Aug 11, 2009 1:47 am

Hello again!

After installing another internal USB-device, I can't get my VFD working (VK202-25 USB). The problem occurs when I try to install the USB drivers: The first part of the installation is OK, but during the installation of the second driver the system seems to crash and the PC does a reboot. So it's not possible to install the second driver properly which means that I cannot control the display.
I tried the display installation on 2 different systems (both WIN XP) with the latest driver version (2.07).
I hope you can give me some advices.

Best regards,
Peter_Shaw

Installing the USB driver...

vk-204-25-usb driver/com3 problem