Hi folks.
I got an old LK204-25 and am about to get it up and running again for a media center PC. The thing is i cant remember if its a 5v or 12v version.
Is there any way of telling just by looking at it?
Voltage question......
This should help
http://www.lcdforums.com/forums/viewtop ... ht=voltage
safe bet is to start with 5V and make sure you wire the power cable correctly, check the manual for the pinout.
http://www.lcdforums.com/forums/viewtop ... ht=voltage
safe bet is to start with 5V and make sure you wire the power cable correctly, check the manual for the pinout.
Henry J.
President
Matrix Orbital
President
Matrix Orbital