madhusudan.jadhav,
At this point I would highly recommend trying this:
It will verify your screen is working as well as show you the code, including initialization.
https://github.com/MatrixOrbital/Basic-EVE-Demo
require code for designing on EVE2-70A
Moderator: Mods
Re: require code for designing on EVE2-70A
Henry J.
President
Matrix Orbital
President
Matrix Orbital
-
- LCD Geek
- Posts: 25
- Joined: Wed Apr 03, 2019 11:24 am
Re: require code for designing on EVE2-70A
Hi Henry,
I used the code.Used library and configuration also and integrated it.the ValH is 0 and ValL 255. I changed the delay time several times
I used the code.Used library and configuration also and integrated it.the ValH is 0 and ValL 255. I changed the delay time several times
Last edited by madhusudan.jadhav on Sat Sep 21, 2019 10:16 am, edited 1 time in total.
-
- Matrix Orbital
- Posts: 247
- Joined: Thu Sep 24, 2015 9:38 am
Re: require code for designing on EVE2-70A
Hi madhusudan.jadhav,
Which test executable are you running, and which display variant are you using?
Cheers,
Daniel
Which test executable are you running, and which display variant are you using?
Cheers,
Daniel
Daniel Divino
Technical Support
Matrix Orbital
Technical Support
Matrix Orbital
-
- LCD Geek
- Posts: 25
- Joined: Wed Apr 03, 2019 11:24 am
Re: require code for designing on EVE2-70A
Eve2_81x.h, MarixConf.h, Process.h. I am using EVE2-70A-TPR. I am trying to configure with xmc4500 relax kit. I am using xmc for Arduino code. i have manipulated for the project. I think due to no backlight the display isnot coming. because the display is always black. I am using external 3.3 volt to give supply to display. Also, the program goes at the end there no stucking anywhere. i am able to read reg_id.
-
- Matrix Orbital
- Posts: 247
- Joined: Thu Sep 24, 2015 9:38 am
Re: require code for designing on EVE2-70A
Hi madhusudan.jadhav,
I believe you mentioned you were trying out the Basic EVE Demo as a quick test to verify that your hardware works. Please note that the Basic EVE Demo was developed to run on an EVE display connected to a USB2SPI Bridge adapter.
Were you able to run the Basic EVE Demo properly on your EVE2-70A-TPR display? You mentioned that the ValH and ValL were not coming up properly. Were you running the EVE2_70A_TPR.exe, which is designed specifically for your display?
Cheers,
Daniel
I believe you mentioned you were trying out the Basic EVE Demo as a quick test to verify that your hardware works. Please note that the Basic EVE Demo was developed to run on an EVE display connected to a USB2SPI Bridge adapter.
Were you able to run the Basic EVE Demo properly on your EVE2-70A-TPR display? You mentioned that the ValH and ValL were not coming up properly. Were you running the EVE2_70A_TPR.exe, which is designed specifically for your display?
Cheers,
Daniel
Daniel Divino
Technical Support
Matrix Orbital
Technical Support
Matrix Orbital