Inverse Blue!!!!!!!!!!!!

Post by **Henry** » Fri Aug 23, 2002 11:49 am

The LK204-25-WB has been released as of today! For all the people who plan on using the display in a computer, make sure to get the Wide Voltage model!

http://www.matrixorbital.com/products/lk204-25.htm

_________________
Henry J.
Head of Technical Support
Matrix Orbital

<font size=-1>[ This Message was edited by: Henry on 2002-08-23 11:54 ]</font>

Post by **Cheese** » Fri Aug 23, 2002 3:30 pm

Super nice... would prefer it with the -PC controller though

Rob.

psykik · Post by **psykik** » Sun Aug 25, 2002 5:19 pm

Hey Henry before i order this,

Which mounting kit works with it?

Do you have an aluminium mounting for it?

Are you planning a version of this lcd which can be used as a baybus too?

thanks

Post by **Henry** » Mon Aug 26, 2002 9:47 am

OK, the LCD2041 versions are in as well!

http://www.matrixorbital.com/products/lcd2041.htm

Post by **Henry** » Mon Aug 26, 2002 9:49 am

On 2002-08-25 17:19, psykik wrote:
Hey Henry before i order this,

Which mounting kit works with it?

MK2041 for just a mounting kit and the B2041 for the PC Bay insert

Do you have an aluminium mounting for it?

No.

Are you planning a version of this lcd which can be used as a baybus too?

Not anytime soon, but in the long time future maybe.

Gimm_MO_NOW · Post by **Gimm_MO_NOW** » Mon Aug 26, 2002 11:16 am

Thank you Henry.
You don't know how much I've been waiting for this.
I'll link some pics of my clear case once I mount the LCD.

Post by **Henry** » Mon Aug 26, 2002 11:28 am

Looking forward to it

Gimm_MO_NOW · Post by **Gimm_MO_NOW** » Mon Aug 26, 2002 11:35 am

Just before I order the module, is voltage input the only difference between the regular and the wide voltage module?

Also, is it safe to use power source from pin 9 of serial connection from motherboard instead of the cable provided by the power supply? The manual says the module will die if the power goes above 5.5 volts.
Can I use above methode for the wide voltage module?

Post by **Henry** » Mon Aug 26, 2002 12:10 pm

On 2002-08-26 11:35, Gimm_MO_NOW wrote:
Just before I order the module, is voltage input the only difference between the regular and the wide voltage module?

Also, is it safe to use power source from pin 9 of serial connection from motherboard instead of the cable provided by the power supply? The manual says the module will die if the power goes above 5.5 volts.
Can I use above methode for the wide voltage module?

Computer power supplies are not nice some times when it comes to voltages. Using the Wide Voltage model will keep you unit safe incase there is a voltage spike... if you plan on powering the LCD through the DB-9 connector you might as well het the standard voltage one. Also, the LCD will draw about 100mA of power, so you may want to check that the motherboard will provide that much current.

psykik · Post by **psykik** » Mon Aug 26, 2002 9:48 pm

does the BVF2041-BK come with a VFD or is the price alone $141.75 ?

If not, the LK204-25vpt $94.05 + drive bay insert $141.75 = $235.80 ( that right? )

what other wires would i need to buy from you to make this work right out the box?

thanks

Post by **Henry** » Tue Aug 27, 2002 9:38 am

The BVK2041-VK comes with the VFD (VFD2041-V)...

To make the LK204-25-WB-V in a insert, get the display and then a B2041-BK (or what ever color) and everything will be there for you.