Page 2 of 2
Posted: Tue Jul 08, 2003 3:15 pm
by Narayan
all the drivers are from the fourm
DLL problems with LCDC
Posted: Thu Jul 10, 2003 11:56 pm
by Muzzlehatch
Naryan, I had your problem too and I fixed it by installing the latest LCDC (1.05.26) This version just came out and if you don't have it try getting it from
http://www.lcdc.cc/downloads.htm. All my weird .dll problems went away when I installed this upgrade.
HTH!
Try This
Posted: Sun Jul 13, 2003 10:26 am
by Anarchi5t
Posted: Mon Jul 14, 2003 3:03 pm
by Miles
Narayan,
Did you get your problem resolved...?
Posted: Mon Jul 14, 2003 3:26 pm
by DrBob147
All you guys having problems installing the drivers on WinXP...
You must totally remove the old drivers before you install the new V1.1...the only way that it worked for me was to go to "control panel"...click on "add/remove programs"...then search for MO Drivers and click Remove. It seems that windows does not like to totally remove stuff any other way. NOTE: when doing this, make sure that your display is disconnected...after removing the old drivers, plug the USD cable back in and when it says "new hardware found", have the Hardware Wizard point to the new drivers (V1.1) that you downloaded from the link above. This has worked perfectly for me and a few others that I know...Good luck!
Posted: Mon Jul 14, 2003 3:38 pm
by Miles
Thanks for the post DrBob...!!
