How to connect a LED to the Rx/Tx Pins
Posted: Fri Dec 26, 2003 10:54 am
the topic says it all - i have made a picture and "build-in" my ideas of installing the leds - maybe one of them is the right one.
thx NoOnE
thx NoOnE
Matrix Orbital Corp
Matrix Orbital home of Serial RS232, USB, I2C, TTL, RS422, HDMI, EVE, SPI, QSPI, LCD, VFD, TFT, OLED, HMI and Touchscreen displays
https://www.lcdforums.com/forums/
How to connect a LED to the Rx/Tx Pins
Page 1 of 1
Posted: Mon Dec 29, 2003 12:22 am
Red circles
Two 3,6 Volt Led to RX /Tx. Where to put the resistances ?
Posted: Thu Feb 05, 2004 9:12 am
I've two 3,6 Volt Led that i want to connect to Rx and Tx pins.
My question is: where do i put the resistances ? In what pins ? and if a value os 100 ohm is ok ?
Thanks in advance
My question is: where do i put the resistances ? In what pins ? and if a value os 100 ohm is ok ?
Thanks in advance
Posted: Thu Feb 05, 2004 2:18 pm
Please see the following link for an in-depth look at this topic. If you have any further questions, feel free to post them...
http://www.lcdforums.com/forums/viewtopic.php?t=1527
http://www.lcdforums.com/forums/viewtopic.php?t=1527