Page 1 of 1
MX2 Cable question + MX4 ?
Posted: Fri Jan 09, 2004 4:03 am
by VJ
Hello,
In the accessories list for the MX2 is an internal USB cable (USB cable internal 2ft). Is it also possible to obtain an external one ? Or does it take a standard USB cable ?
Any idea when the MX4 is coming ? And can you share that idea ?
Will it also have the 1-wire interface ?
J
Posted: Fri Jan 09, 2004 11:47 am
by Adam
The MX unit comes with an A to B cable that goes from the unit to the back USB port on a computer.
MX4 hopefully next week. Samples are coming today of the keypad. The unit will wrok just like the MX2. The accessories for the MX2 will aslo work for the MX4.
Posted: Sat Jan 10, 2004 1:47 pm
by VJ
Thanks!
J
Posted: Tue Jan 20, 2004 6:43 am
by VJ
That A-B cable supplied with the MX-series, what length is it ?
Are there cable limitations regarding the MX ? (e.g. some cameras don't like extension cables or hubs in between)
(My case is quite big (Lian Li PC70), and while I have an idea of how I could guide it to the outside, it might require a relatively long cable)
J
Posted: Tue Jan 20, 2004 9:11 am
by Bernie
Hello, the cable is 3ft. You can view it on our web page under accessories or by the link below:
http://www.matrix-orbital.com/pages/acc ... ?CurPage=2
Regards,
Bernadine
Posted: Wed Jan 21, 2004 1:15 am
by VJ
bernie wrote:Hello, the cable is 3ft. You can view it on our web page under accessories or by the link below:
Oops, I didn't check that...
Thanks!
J