Page 1 of 1
lcd display problem
Posted: Tue Mar 09, 2004 1:25 am
by Mann
Need help.I've just install the MX232 to my system.Connect to usb port and hardware detected and install the required drivers.However the display remain lighted without any text.Install lcdc software and try to auto detect the screen on com port but no screen is detected by lcdc.Is this item defective or did i do anything wrong here.
system:Asus P4C800 E Deluxe 2.4@3.0 Audigy 2 zs
Posted: Wed Mar 10, 2004 12:47 pm
by Miles
In your device manager, what is the display listed as??
Posted: Thu Mar 11, 2004 6:55 pm
by Mann
Miles wrote:In your device manager, what is the display listed as??
At Ports (COM & LPT) it's listed as Matrix Orbital MX2xx USB Driver (COM3)
At Universal Serial Bus controllers it's listed as Matrix Orbital MX2xx USB Driver
Posted: Fri Mar 12, 2004 9:12 am
by Miles
It sounds like the MX2 is properly detected. In the control panel can you change the com port to 5 for example...? and try LCDC again, make sure you have the newest version of LCDC! What OS are you running?
Posted: Fri Mar 12, 2004 6:06 pm
by Mann
system is runnig on WinXP SP1a.Did try to use other com port but results remain the same.my understanding is that on first use of the MX2 a text greeting of Matrix Orbital should be display on the first line of the lcd screen followed by the model number on the second line however none is display except white boxes wth no text.i'm using the latest LCDC.need help desperately
Posted: Fri Mar 12, 2004 6:17 pm
by Mann
guess what.
i did try again to change the com port and suddenly out of the blues the MX2 is alive.Matrix Orbital and model type is written on the display.
.thank you very much Miles for your help.now it's time play with my new toy.
cos i know support is around should anything goes wrong(knock on wood).thank you again for your great support.
Posted: Mon Mar 15, 2004 9:29 am
by Miles
Good to hear!! Enjoy!
If you have any further questions or concerns, feel free to post!