LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT Series
Moderators: Henry , Mods
fulostix
LCD?
Posts: 4 Joined: Thu Jul 14, 2005 11:59 am
Post
by fulostix » Thu Jul 14, 2005 12:02 pm
My LK202-24-USB-WB will not work anymore. It has been connected to the USB interface and was working fine. Then I turned on my computer one day and nothing happened. I attempted to use the floppy drive connector, but that didn't work either. Does anyone have any ideas?
Tom
Matrix Orbital
Posts: 1030 Joined: Mon Jul 19, 2004 4:43 pm
Location: Calgary
Contact:
Post
by Tom » Thu Jul 14, 2005 12:47 pm
Hi fulostix,
Thank you for posting at the lcd forums.
Do you see the startup screen when you plugged in the floppy power cable?
fulostix
LCD?
Posts: 4 Joined: Thu Jul 14, 2005 11:59 am
Post
by fulostix » Thu Jul 14, 2005 2:31 pm
No nothing came up at all. It's just blank...no power, lights, etc.
Miles
Matrix Orbital
Posts: 1105 Joined: Mon Mar 04, 2002 4:00 pm
Post
by Miles » Thu Jul 14, 2005 2:34 pm
With the A-B USB cable connected, what is the device listed as in the Device Manger under Ports (COM&LPT) and Universal Serial Bus controllers?
Miles Y.
Head of Technical Support
Product Manager
Matrix Orbital
fulostix
LCD?
Posts: 4 Joined: Thu Jul 14, 2005 11:59 am
Post
by fulostix » Thu Jul 14, 2005 8:31 pm
It is not listed at all. I tried a different USB cable, and different ports...the LCD will just not work. I'm wondering if it's broken
Tom
Matrix Orbital
Posts: 1030 Joined: Mon Jul 19, 2004 4:43 pm
Location: Calgary
Contact:
Post
by Tom » Fri Jul 15, 2005 8:58 am
How long did you have the unit for?
fulostix
LCD?
Posts: 4 Joined: Thu Jul 14, 2005 11:59 am
Post
by fulostix » Fri Jul 15, 2005 1:15 pm
I bough it on EBay about a month ago...might be out of luck.
Tom
Matrix Orbital
Posts: 1030 Joined: Mon Jul 19, 2004 4:43 pm
Location: Calgary
Contact:
Post
by Tom » Fri Jul 15, 2005 1:38 pm
Can I get the serial number?