Page 1 of 1
Fans control work sometime
Posted: Mon Aug 15, 2005 3:46 pm
by chills
i Have purchased the MX4. I am very very green to this but i am learning. My four fan will come on when i boot the system. But the min i go into the MX4 they all shut down. Can you please tell me if i have the unit installed correct or maybe the software installed incorrectly. and also how do i control the fans Thanks
Posted: Mon Aug 15, 2005 4:14 pm
by Tom
Hi Chills,
Thank you for posting at the discussion forum.
To tell whether you have the unit installed correctly, you should be able to see in the device manager "Matrix Orbital Broadcast driver" under the Universal Serial Bus Controllers branch. You display will also light up with the Matrix Orbital start screen, if your unmodified floppy power connector is not plugged in. If you wanted to run fans on your unit, then you must connect the fans.
To control the device with LCDC please refer to the GPO PWM/RPM control in the LCDC manual at
http://www.lcdc.cc/help/configuration.htm#amxxgpo
If you have anymore questions or concerns, please feel free to post.
Best Regards,