Matrix Orbital Corp

Posted: **Wed Feb 08, 2006 7:53 am**

LK204-25. I want to supply the power via the RS232 connector. Do a need to apply a jumper? The LK162-12 manual shows a jumper, but the LK204 manual does not.

Posted: **Wed Feb 08, 2006 10:42 am**

Hi pieter,

I have attached an image of where the jumper is for the LK204-25. If you solder the jumper it will allow you to provide power via DB9.

Posted: **Thu Feb 09, 2006 7:04 am**

Thanks, Jon. This is the right trick and my display is working now.

Matrix Orbital Corp

LK204: jumper required for power?

LK204: jumper required for power?

Re: LK204: jumper required for power?