Matrix Orbital Corp

I own an MX412 and was wondering a couple of things.

To use the fan controller option you have to connect a floppy connector,can
I use one that comes directly off of my power supply?and also can I use any
usb cable with the screen,I have a longer one I wanted to use to make it
easier to route through my case.


Thanks

Hi diarh34,

Thanks for posting on the forum! I have emailed you the answers to your questions however, for the benefit of others:
the answer to all of your questions is YES!

Thanks!

Lois: "Oh, please, Peter! I'm holding iced tea!"

yes yes I recieved it,thank you very much.




I love my mx412

I have another question also,on the piece of paper that came in the box with the screen.It says to use a command in "command set" to stop the blinking cursor on the screen.How exactly to I get to command set?I've also been having a problem with lcdc sticking on one screen and never going to the next or just displaying the same screen over and over : / (this seems to only happen when I have winamp running).Also is there a way to program the keys on the keypad to do other things?


thanks,<3

You are looking for this - it is the manual which describes the command set, http://www.matrixorbital.ca/manuals/LK_ ... SB_100.pdf
but you probably don't really want it. What you want is more knowledge about how to use LCDC. That, unfortunately, just takes a little time. Have a look at the LCDC site http://lcdc.planetdps.com/ and play with it for a few days. I think you will find that all your questions will find their own answers after you have played with it a bit - you will also gain the ability to do interesting new things like change key functions.

Good luck and have fun!

oh man I just answered all my questions by playing around in lcdc



thanks guys,I LOVE MY MO