Page 1 of 1
VK204-25 Underline Cursor
Posted: Wed Jun 04, 2008 12:28 pm
by kfaria
On: decimal 254 74
Off: decimal 254 75
Correct? Not happening here in code or uProject on v5.4 or v6.0.
What am I missing?
Posted: Wed Jun 04, 2008 2:54 pm
by Clark
Hi Kfaria,
Unfortunately, the manual is incorrect, and I apologize for the inconvenience. I have made a note of this, and a correct version will be available shortly.
The underline cursor function is not physically available on the VK204 line of displays, therefore, this command will have no effect on the unit.
Again, I apologize for the error, and can assure you that it will be fixed. If you have any further questions at this time, please just let me know.
Thanks,
Troy
Posted: Wed Jun 04, 2008 3:09 pm
by kfaria
Thanks Troy. No big deal for me.
Also check the description for "blinking block cursor on" in the Rev3 manual section 5.14.
Posted: Wed Jun 04, 2008 4:42 pm
by Clark
No worries, thanks for the tip on that second one, it has also been noted. Again, I apologize for the state of our documentation; I'm working to improve it, but it is a slow process.
~Troy