Posted: Mon Jun 27, 2011 5:58 pm
Hi Clark/Troy (:eyebrow:)
Thanks for responding. It turns out the problem was on my end, I had mixed up two pins and not wired the power output from the Arduino correctly. Once I fixed this so the display actually got 5V, it starts up and displays text fine. Sorry for bothering.
cheers,
/Patrik
Thanks for responding. It turns out the problem was on my end, I had mixed up two pins and not wired the power output from the Arduino correctly. Once I fixed this so the display actually got 5V, it starts up and displays text fine. Sorry for bothering.
cheers,
/Patrik