Matrix Orbital Corp

Hi,

I´m uploading 12 images to the LCD. The images are uploaded correctly, but, when i upload 1 type of font all images uploaded before are erased, but the fonts remains. At the same time, when first, i upload fonts and after that the images the fonts are erased and the images remains.

The images are uploaded from ID 1 to ID 12, the font are in ID 1 and Im using the MOGD# Software v1.1.5. Am i overriding locations?

Can you help me with this.

Thanks
Kind of regards

Hi,

I understand you are having an issue with uploading.
What PCB Revision is your GLK240128-25?
Also what firmware are you using?

Thank you
Martino

Hi Tino,

Thanks for helping.

The LCD has PCB R4.0 printed and I'm using firmware 8.3. I'm noticing that only the image on first location (ID 1) is erased when i upload a font and viceversa only first positions.

Hi,

Please upgrade your firmware to 8.4 this may help. You can find the firmware upgrader at:
http://www.matrixorbital.ca/software/GLT%20Series/

Please let me know if this works.
Thanks
Martino