I have the EVE2-USB2SPI-KIT-A board with the EVE3-70G-BLM-TPC-F32 display.
When I try to use the software EVE3_70G_TPC.exe from the repo https://github.com/MatrixOrbital/Basic-EVE-Demo I have an error. The soft goes into an infinite loop. It only shows that then nothing:
Code: Select all
channels found : 1
USB->SPI Bridge opened
Code: Select all
do
{
Ready = Cmd_READ_REG_ID();
}while (!Ready);
I have the driver "mtx-ftdi-2.12.28-1" and the board is seen as "Matrix Orbital USB 2 SPI Driver (COM23)" by my computer.
Here is a photo of my setup, the USB led is always OFF. I also tried with an external power supply.
Do you have any idea of the problem?
Thank you