Hello Jamesh,

Thank you for contacting Matrix Orbital technical support.

Your code looks good; it would keep the keypad backlight brightness to max 255 (which is the default setting).
Can you tell me what is not working?

Thank you,
Raquel

Hello Trout,

Thank you for posting on the forum.

We are yet to release the manual for the EVE4x modules.
I will send you an email via our support email.

Thank you,
Raquel

Hello, Thank you for posting on the forum. Please be reminded that Manual Override puts the display in temporary display settings. You will need to make sure you save the settings you need eg: baud rate, contrast, backlight. You can do this by sending the corresponding commands, eg: Change Baud Rate...

Hi,

Thank you for your post.
For software enquiries, please try Bridgetek's forum: http://www.brtcommunity.com/

Best Regards,

Hi,

Thank you for your post.
For software enquiries, please try Bridgetek's forum: http://www.brtcommunity.com/

Best Regards,

Hello Raffaeler, Thank you for posting on the forum. Please check out configuration guide here: https://www.lcdforums.com/forums/viewtopic.php?f=45&t=6837 Please note that since EVE Screen Designer has been updated, some of the guidelines may not be at the same path as described. For your EVE3-7...

Hello Lixx,

Thank you for posting on the forum.

For software enquiries, it would be best to please post the question to Bridgetek's forum:
http://www.brtcommunity.com/

Thank you,
Raquel

Hello James, Thank you for posting on the forum. The VPT model may work down at 5V but it is intended to work at 9-35V. You should be able to supply power from either of these connections (I assume that you have a -CS model): -Extended Serial Comm/ Power Header -I2C header The Alternate Power Connec...

Hello Zoran, Thank you for contacting Matrix Orbital technical support. I will forward your question to my colleague, and update you when I have the information. In the mean time can I please get the serial number on your EVE unit? It's a small clear sticker with format xxMxx-xxxx. Thank you, Raquel

Hello John, Here is the timing for the EVE3x-70A: DWIDTH = 800; DHEIGHT = 480; HCYCLE = 928; HOFFSET = 127; HSYNC0 = 40; HSYNC1 = 88; VCYCLE = 525; VOFFSET = 44; VSYNC0 = 13; VSYNC1 = 16; PCLK = 2; SWIZZLE = 0; PCLK_POL = 1; HSIZE = 800; VSIZE = 480; CSPREAD = 0; DITHER = 1; Hope this helps. Thank y...

Sorry, I assumed you have a USB model.
Unfortunately, no there is no way of knowing a display was plugged in via the serial com port without writing to it.

Thank you,
Raquel

Glad to hear!
-Raquel

Hello,

Thank you for posting on the forum.

You can check for ttyUSB0 to know when a display is plugged in.
To further confirm, ask for a module type or version number (please see commands in the manual) and check the display's reply.

I hope this helps.

Thank you,
Raquel

Hello Madz, Thank you for posting on the forum. I wonder if you please give Boot Logo a try: https://www.matrixorbital.com/index.php?route=download/download/get&did=543 First configure the Serial Port; then the Display Size (4x20). Make your changes - write what you want for your start up screen...

Hello Matt, Thank you for posting on the forum. And thank you for considering our EVE series as alternative for your current project. You may please find our sample code (and library) here: https://github.com/MatrixOrbital There are available software tools from Bridgetek: https://brtchip.com/ic-mod...