the correct screen to get

LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT Series

Moderators: Henry, Mods

Post Reply
spags
LCD?
Posts: 4
Joined: Thu Jul 22, 2004 6:36 am

the correct screen to get

Post by spags »

hi i was looking at a website and it bought me to matrix orbital im very interested in the screen but found that the product coe that they gave me was NK204-V LCD i cannot find this on the matrix website and i wonder if anyone knows of a product with its product code. here is the relevant website to get the item i was reading http://www.bit-tech.net/article/77 basically i want the screen that as it says in the link that i just gave you can connect led's to some parts and create them into lights to tell you that you have an email waiting fir the outside of the case using lcdc software. thanks for your help

Tom
Matrix Orbital
Matrix Orbital
Posts: 1030
Joined: Mon Jul 19, 2004 4:43 pm
Location: Calgary
Contact:

Post by Tom »

Well all our products give you the ability of controlling led's or some sort of output via the low power GPO's (General Purpose Output). The model you're refering to shown on our website is the LK204-25. Use can check it out and purchase any of the products at the link below.

http://www.matrixorbital.com/pages/products.asp?CatID=1

spags
LCD?
Posts: 4
Joined: Thu Jul 22, 2004 6:36 am

Post by spags »

Tom wrote:Well all our products give you the ability of controlling led's or some sort of output via the low power GPO's (General Purpose Output). The model you're refering to shown on our website is the LK204-25. Use can check it out and purchase any of the products at the link below.

http://www.matrixorbital.com/pages/products.asp?CatID=1
thanks alot i mght be purchasing one of these in the near future. do you know where i can get informatino telling me how to set up the led's to tell me when i get emails. thanks again

Tom
Matrix Orbital
Matrix Orbital
Posts: 1030
Joined: Mon Jul 19, 2004 4:43 pm
Location: Calgary
Contact:

Post by Tom »

Your welcome...You can create an event on LCDC to turn on your LEDs when you get emails. The link below will help you set it up. Also, If you are planning to use it with your PC you can purchase an MX series LCD screen that mounts into your PC bay, and you can purchase an LED board that can be mounted in your PC case. The links below will give you more information.

http://www.lcdc.cc/help/screenbuilder.htm#Events - setting up the events

http://www.matrixorbital.com/pages/choosemxcat.asp - MX series

http://www.matrixorbital.com/pages/acce ... sp?CatID=2 - LED board


:D

spags
LCD?
Posts: 4
Joined: Thu Jul 22, 2004 6:36 am

Post by spags »

Tom wrote:Your welcome...You can create an event on LCDC to turn on your LEDs when you get emails. The link below will help you set it up. Also, If you are planning to use it with your PC you can purchase an MX series LCD screen that mounts into your PC bay, and you can purchase an LED board that can be mounted in your PC case. The links below will give you more information.

http://www.lcdc.cc/help/screenbuilder.htm#Events - setting up the events

http://www.matrixorbital.com/pages/choosemxcat.asp - MX series

http://www.matrixorbital.com/pages/acce ... sp?CatID=2 - LED board


:D
a mind of information lol do you know the cheapest lcd screen that can do the gpo (led on for new email)lol thanks again

Adam
Matrix Orbital
Matrix Orbital
Posts: 331
Joined: Wed Feb 27, 2002 4:00 pm
Location: The highest level on a short building
Contact:

Post by Adam »

Hello Spags,

I would suggest looking at the LCD2041. Have a look through the on line manual http://www.matrixorbital.com/manuals/ht ... /index.htm
Adam L.
Sales Manager
Matrix Orbital

A nod is as good as a wink to a blind bat.

spags
LCD?
Posts: 4
Joined: Thu Jul 22, 2004 6:36 am

Post by spags »

Adam wrote:Hello Spags,

I would suggest looking at the LCD2041. Have a look through the on line manual http://www.matrixorbital.com/manuals/ht ... /index.htm
]


hi thanks for the link had a look it looks good would you be able to tell me an exact price (or near enough to exact that you can get with 3 led's included and all cables that i need to connect. thanks alot

Adam
Matrix Orbital
Matrix Orbital
Posts: 331
Joined: Wed Feb 27, 2002 4:00 pm
Location: The highest level on a short building
Contact:

Post by Adam »

In regards to the three LEDs are you looking at getting the LED Indicator? If so you will want the LK204-24-USB unit. If you are looking for a serial unit with the ability to attach three LEDs you should look at the LK204-25 unit. With this unit however you will need to source out the individual LEDs yourself as we do not sell them individually. All pricing can be found on our products page. All units are sold separately so you will need to order cables as well.
Adam L.
Sales Manager
Matrix Orbital

A nod is as good as a wink to a blind bat.

Post Reply