Hi,
I wanted to know which one of your LCDs was optimal for my situation.
I currently have the LCD 2041, but I think it might be too advanced for my requirements.
I want to connect the LCD to a microprocessor through a serial connection.
All I really need to display are large numbers with a decimal.
I think the typical character size is around 2.95 mm * 4.75 mm. I would like something which is at least 3 to 4 times as big.
Lastly, I would like for it to refresh at a pretty fast rate.
I know the LCD 2041 can do this (expect I am not sure of its refresh rate), but is there something simpler out there?
I would appreciate any input!
Thanks,
- PB
Which LCD is optimal?
-
Ray
- Matrix Orbital
- Posts: 745
- Joined: Thu Dec 13, 2001 4:00 pm
- Location: Earth.... I think..
- Contact:
The LCD 2041 is actually one of our simplest serial products except for the 3 GPO's it offers nothing extra like keypad support or 1-Wire support which many of our other display do have.
As for your large font requirement besides indeed using the LCD2041 in large number mode the only alternative I can give you is take a look at our graphical displays those will display any font in any size you want but the refresh rate will be significantly lower then the LC2041.
As for your large font requirement besides indeed using the LCD2041 in large number mode the only alternative I can give you is take a look at our graphical displays those will display any font in any size you want but the refresh rate will be significantly lower then the LC2041.