Hi all,
I am having an issue with the mogdsharp software with a GLK19264-7T-1U-USB. We've been using these LCDs in our appliances for several years with no issues. However, in a current build, when loading bitmaps and fonts into the LCD memory using the mogdsharp software, we get the following error:
There was a problem uploading the Image to the device..(Read Timeout)
The COM port and Baud Speed are both set correctly. One thing I did notice is that the only option for PCB Revision is 1.x. This is one of the new boards (with "a" appended to the model number), so I was thinking that may have something to do with it. Any thoughts?
GLK19264-7T-1U-USB / mogdsharp
Re: GLK19264-7T-1U-USB / mogdsharp
Hi abrown,
To better understand exactly what is going on with your GLK19264-7T-1U-USB I just have a couple questions.
Does Mogd# detect the display when you use the "Auto Detect Display" feature?
Can you write text to the display or draw to the display?
Thanks,
Martino
To better understand exactly what is going on with your GLK19264-7T-1U-USB I just have a couple questions.
Does Mogd# detect the display when you use the "Auto Detect Display" feature?
Can you write text to the display or draw to the display?
Thanks,
Martino
Martino DeLeon
Matrix Orbital
Technical Support Representative
Matrix Orbital
Technical Support Representative
Re: GLK19264-7T-1U-USB / mogdsharp
Thanks for the quick response. :)
When I Auto Detect Display, it does automatically detect the module. I can send text to the display with no issues. I have not tried drawing yet, but will do so shortly and let you know the result.
When I Auto Detect Display, it does automatically detect the module. I can send text to the display with no issues. I have not tried drawing yet, but will do so shortly and let you know the result.
Re: GLK19264-7T-1U-USB / mogdsharp
Hi abrown,
Ok that's good.
Can you try running Mogd# as administrator and moving the Mogd# folder to your desktop. This could fix the issue.
Thanks
Martino
Ok that's good.
Can you try running Mogd# as administrator and moving the Mogd# folder to your desktop. This could fix the issue.
Thanks
Martino
Martino DeLeon
Matrix Orbital
Technical Support Representative
Matrix Orbital
Technical Support Representative
Re: GLK19264-7T-1U-USB / mogdsharp
Thanks Tino, that seems to have resolved the issue. :)
Re: GLK19264-7T-1U-USB / mogdsharp
Perfect!
Martino
Martino
Martino DeLeon
Matrix Orbital
Technical Support Representative
Matrix Orbital
Technical Support Representative