MX232 & Fans

uxbod · Post by **uxbod** » Sun Jul 31, 2005 10:18 am

Hi,

could somebody please point me to a manual or posting that shows how to connect fans to the display ... i have three 120mm fans on a radiator in a watercool setup that I would like to monitor.

TIA

Tom · Post by **Tom** » Tue Aug 02, 2005 2:09 pm

Hi Tia,

The manual for the MX232 can be found at http://www.matrixorbital.ca/manuals/LK_ ... SB_140.pdf

You will need to connect a floppy power cable highlighted as high power input shown on page 4 of the manual. There are 3 pin fan headers above the high power input.

If you have anymore questions, please feel free to post.

Best Regards,

uxbod · Post by **uxbod** » Mon Aug 08, 2005 8:25 am

Thanks,

but how much ampage can each fan channel take?

TIA

Tom · Post by **Tom** » Mon Aug 08, 2005 9:01 am

uxbod,

Each fan header rated for safe operation is a maximum of 12V, 1000mA.

If you have anymore questions, please feel free to ask.

Best Regards,