Search found 11 matches

by madhusudan.jadhav
Sat Sep 21, 2019 10:20 am
Forum: EVE2 & EVE3 SPI TFT's
Topic: require code for designing on EVE2-70A
Replies: 19
Views: 1215

Re: require code for designing on EVE2-70A

Eve2_81x.h, MarixConf.h, Process.h. I am using EVE2-70A-TPR. I am trying to configure with xmc4500 relax kit. I am using xmc for Arduino code. i have manipulated for the project. I think due to no backlight the display isnot coming. because the display is always black. I am using external 3.3 volt t...
by madhusudan.jadhav
Fri Sep 20, 2019 4:03 pm
Forum: EVE2 & EVE3 SPI TFT's
Topic: require code for designing on EVE2-70A
Replies: 19
Views: 1215

Re: require code for designing on EVE2-70A

Hi Henry,
I used the code.Used library and configuration also and integrated it.the ValH is 0 and ValL 255. I changed the delay time several times
by madhusudan.jadhav
Fri Sep 13, 2019 1:02 pm
Forum: EVE2 & EVE3 SPI TFT's
Topic: require code for designing on EVE2-70A
Replies: 19
Views: 1215

Re: require code for designing on EVE2-70A

Hi Daniel, No I amnot written it. Also backlight isnot coming. is this the problem? i have given 3.3 v external supply to all supply pins of display. And GND is common for supply source and mcu card. Int is grounded through 4.7 kohm resistor. If you can see I defined the CLKEXT and frequency 36M. Pl...
by madhusudan.jadhav
Thu Sep 12, 2019 1:03 pm
Forum: EVE2 & EVE3 SPI TFT's
Topic: require code for designing on EVE2-70A
Replies: 19
Views: 1215

Re: require code for designing on EVE2-70A

Hi there,
I am using eve2-70-TPR. I am getting reg-Id 7c but cpu reset I am getting 224. and display isnot coming on
by madhusudan.jadhav
Sat Aug 10, 2019 10:19 am
Forum: EVE2 & EVE3 SPI TFT's
Topic: require code for designing on EVE2-70A
Replies: 19
Views: 1215

Re: require code for designing on EVE2-70A

I am able to read 7c from reg id. But backlight isnot coming. Also i am reading reset register it is giving output 12.
by madhusudan.jadhav
Mon Aug 05, 2019 3:20 am
Forum: EVE2 & EVE3 SPI TFT's
Topic: require code for designing on EVE2-70A
Replies: 19
Views: 1215

Problem of booting on EVE2-70A

HI, As I am using Matrix orbital EVE2-70A TPR module I did the following wiring 1) pin no.1 3.3v, pin no.16 3.3v, pin no.17,18 all are shorted to 3.3 v from mcu board. 2) Pin no.2 GND, Pin no. 15 GND, Pin no. 19,20 all are shorted to GND from mcu board 3) int pin is shorted to GND of mcu board throu...
by madhusudan.jadhav
Sat Jun 08, 2019 11:51 am
Forum: EVE2 & EVE3 SPI TFT's
Topic: require code for designing on EVE2-70A
Replies: 19
Views: 1215

Re: require code for designing on EVE2-70A

Hi there,
I have ported my infineon codes. spi writes the data. but cannot read from lcd. Also power light is red. After Host command i tried to read the REG_ID but the value always comes 0x00. Also I am not using interrupt.
by madhusudan.jadhav
Sun Apr 21, 2019 12:03 pm
Forum: EVE2 & EVE3 SPI TFT's
Topic: require code for designing on EVE2-70A
Replies: 19
Views: 1215

Re: require code for designing on EVE2-70A

ERROR: CPU is not halted ERROR: Can not read register 15 (R15) while CPU is running Reading all registers ERROR: Can not read register 0 (R0) while CPU is running ERROR: Can not read register 1 (R1) while CPU is running ERROR: Can not read register 2 (R2) while CPU is running ERROR: Can not read reg...
by madhusudan.jadhav
Sat Apr 20, 2019 1:35 pm
Forum: EVE2 & EVE3 SPI TFT's
Topic: require code for designing on EVE2-70A
Replies: 19
Views: 1215

Re: require code for designing on EVE2-70A

I get error in debugger cannot read register.
by madhusudan.jadhav
Sat Apr 20, 2019 1:07 pm
Forum: EVE2 & EVE3 SPI TFT's
Topic: require code for designing on EVE2-70A
Replies: 19
Views: 1215

Re: require code for designing on EVE2-70A

Hi,
thank you for given link. I did the program as per manual and eve knob. but display isnot going on. please help.
by madhusudan.jadhav
Wed Apr 03, 2019 11:42 am
Forum: EVE2 & EVE3 SPI TFT's
Topic: require code for designing on EVE2-70A
Replies: 19
Views: 1215

require code for designing on EVE2-70A

Hi there,
I am using matrix orbital EVE2-70A with resistive touch screen display for my industrial projects. I am using infineon xmc4500 relax kit. Please send me the project code which has used this display. I will convert it in my project. Thank you.