LK204: jumper required for power?

LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT Series

Moderators: Henry, Mods

Post Reply
pieter
LCD?
Posts: 2
Joined: Wed Feb 08, 2006 7:49 am

LK204: jumper required for power?

Post by pieter »

LK204-25. I want to supply the power via the RS232 connector. Do a need to apply a jumper? The LK162-12 manual shows a jumper, but the LK204 manual does not.
Top
Jon
Matrix Orbital
Matrix Orbital
Posts: 231
Joined: Mon Oct 24, 2005 10:38 am
Location: Calgary, AB, Canada
Contact:
Contact Jon

Re: LK204: jumper required for power?

Post by Jon »

Hi pieter,

I have attached an image of where the jumper is for the LK204-25. If you solder the jumper it will allow you to provide power via DB9.
Attachments
LK204-25DB9Power.jpg
LK204-25DB9Power.jpg (44.36 KiB) Viewed 2926 times
Top
pieter
LCD?
Posts: 2
Joined: Wed Feb 08, 2006 7:49 am

Post by pieter »

Thanks, Jon. This is the right trick and my display is working now.
Top
Post Reply

Return to “LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT”